The biggest advantage of the solid wooden chair is the natural wood grain and the variety of natural colors. Since solid wood is a constantly breathing organism, it is recommended to place it in an environment with suitable temperature and humidity, and it is necessary to avoid drinks, chemicals or overheated objects placed on the surface, so as not to damage the natural color of the wood surface. If it is a Miner board material, when there is more dirt, the use of diluted neutral detergent with warm water to wipe first, and then wipe with water, remember to wipe off the residual water stains with a soft dry cloth, to be completely wiped clean, and then use maintenance wax polishing, even if it is done, only by paying attention to daily cleaning and maintenance, can the wooden furniture be renewed for a long time. Maintenance and upkeep of solid wood dining chairs 1: Pay attention to the cleaning and maintenance of the surface of the dining table and chair. Regularly use a pure cotton dry soft cloth to gently wipe off the surface floating dust, and every once in a while, use the wet cotton wire to wring out the moisture to finely clean the dust in the corner of the dining table and chair, and then use a clean dry soft cotton cloth to wipe it. Avoid removing stains with alcohol, gasoline, or other chemical solvents. 2: If there is a stain on the surface of the dining table and chair, do not rub hard, you can use warm tea to gently remove the stain, wait until the water volatilizes and apply a little light wax to the original part, and then lightly rub it several times to form a protective film. 3: Avoid scratches from hard objects. When cleaning, do not let the cleaning tools touch the dining table and chair, usually pay attention to, do not let the hard metal products or other sharp tools collide with the dining table and chair, to protect its surface from bump marks. 4: Avoid humid environments. In summer, if the indoor tide is flooded, it is advisable to use thin rubber mats to separate the dining table and chair from the part where the ground is in contact, and at the same time, the wall part of the dining table and chair is kept at a distance of 0.5-1 cm from the wall. 5: Keep away from heat sources. In winter, it is best to place the dining table and chair about 1 meter away from the heating stream to avoid long-term baking, so that the wood will be partially cracked, deformed and deformed and the paint film will be partially deteriorated. 6: Avoid direct sunlight. Outdoor sunlight should be avoided as long as possible to the overall or partial exposure of the dining table and chairs, so it is best to place it in a place where it can avoid the sun. In this way, it does not affect the indoor lighting, but also protects the indoor dining table and chairs.