Different hotel suite furniture, surface materials are different. For example, the legs of tables, chairs, and cabinets are required to be hard wood, which is relatively strong and can bear weight, while other materials can be used for internal materials. If the wood has wormholes, it means that the drying is not complete. The preparation of wood for hotel furniture is not only time-consuming but also labor-intensive, but it is the key to the success of the renovation work. Applying the topcoat is just a preparatory job for coloring. You may spend more time on hotel fixtures than on other hotel furniture refurbishment phases, but the end result will tell you that it's worth it.
Staining hotel suite furniture is a big project, and a little carelessness can ruin the hotel furniture. In the following sections, you will be guided through the entire process of coloring - bleaching, sanding, coloring and back cover. Let's start with some questions you need to figure out before coloring.
No matter how durable, furniture has a lifespan, and in order to prolong its lifespan as much as possible, learn to take care of them. We recommend keeping furniture away from heat sources to avoid damage or premature aging caused by huge temperature differences. At the same time, the placement of furniture can be adjusted to avoid direct sunlight, and use curtains to cover if necessary. Solid wood drawers may difficult to open and close due to excessive expansion, wax or paraffin cement foaming techniques can be applied to the edges and bottom runners of the drawer.
After peeling off the paint, inspect the hotel furniture for surface and structural problems—such as burn marks, stains, cracks, or loose plywood. Second, examine the wood itself. What kind of wood is it? Is it tight or loose? Preparation depends on the material of the wood—loose-grained woods often require some filler; some woods also require special treatments. Is this piece of hotel furniture made from a combination of woods? If so, the less visible woods must first be bleached or stained (usually less expensive) to match the main surface.
Before you're ready to color a suite of hotel furniture, make sure you're familiar with the properties and requirements of the colorant you're using. Read the ingredients and usage information on the jar and follow the manufacturer's directions and recommendations. Make sure you use primers and fillers that are compatible with those specified by the manufacturer and listed in the attached table. As with any hotel furniture, the colorant chosen determines how the wood is prepared for coloration. Not all topcoats can be used with all primers and fillers. Different colorants require different levels of preparation.
In the coming season of summer, for the owners who have stayed in, the hotel furniture needs to be cared for and maintained. For owners who are preparing to decorate in the case of high temperature and high humidity in summer, the pollution will increase accordingly. Experts have given some useful suggestions on how to maintain stainless steel chain plates and avoid summer decoration pollution when summer comes. When most brand sofas are treated with wood, they will first be treated with moisture content. According to professionals, many furniture are made of solid wood in the stressed parts, and high-density boards are used in other parts, which is also to prevent seasonal thermal expansion and contraction. Even with a relative rise in summer humidity, wood will expand only slightly, and these natural changes do not affect the durability of quality hotel furniture.